Omron Intelli Wrap BP Cuff HEM-FL31 Type B (22-42cm)

Product Description :

The Omron Upper Arm Blood Pressure Monitor Intelli Wrap™ Cuff HEM-FL31 Type B is designed for upper arm circumferences from 22 cm to 42 cm (9 to 17 inches), so it should fit well on arms within that range and help you measure your blood pressure comfortably when applied properly. This Intelli Wrap arm cuff is compatible with several Omron upper-arm blood pressure monitors, including HEM-7361T, HEM-7156T, and HEM-7156/A, provided your monitor is one of the models that supports this cuff type.

Important Information:

This OMRON arm cuff can be connected to various OMRON Blood Pressure Monitors. This cuff only works with OMRON Blood Pressure Monitors compatible with HEM-FL31 Type B, as noted on cuff sticker next to the air jack.

Remove tight-fitting and thick clothing from your arm while taking a measurement.

ONLY use the arm cuff on persons whose arm circumference is within the specified range of the cuff.

DO NOT crease the arm cuff or the air tube excessively.

DO NOT fold or kink the air tube while taking a measurement. This may cause an injury by interrupting blood flow.

To unplug the air plug, pull on the plastic air plug at the base of the tube, not the tube itself.

Instructions For Use:

1. Plug the arm cuff into your monitor by inserting the air plug into the air jack securely until it clicks.
2. Apply the arm cuff to your left upper arm. The bottom edge of the arm cuff should be 1 to 2 cm above the inside elbow. The air tube is on the inside of your arm and aligned with your middle finger.
3. Make sure that the air tube is positioned on the inside of your arm and wrap the cuff securely so it can not move around your arm.

Taking measurements on the right arm

The air tube should run along the side of your elbow, along the bottom of your arm. Be careful not to rest your arm on the air tube.

Note: The blood pressure can differ between the right arm and the left arm, and the measured blood pressure readings can be different. OMRON recommends to always use the same arm for measurements. If the readings between both arms differ substantially, check with your physician to determine which arm to use for your measurements.

Features & Specifications :

• • Intelli Wrap Cuff original accessory — upper-arm blood pressure monitor replacement cuff (Model HEM-FL31 Type B).

• • Arm circumference: suitable for arms 22 – 42 cm (wide-range fit).

• • Compatible with Omron BP Monitors: fits HEM-7361T, HEM-7156T, HEM-7156/A* and other OMRON arm monitors that support detachable cuffs of this type (check your unit’s manual for supported cuff codes).

• • High-quality, durable materials designed for long-lasting use.

• • Pre-formed cylindrical design allows easy wrap and good contact all around the upper arm for reliable measurement (360° Intelli Wrap design).

• • Approx. 30 inch (≈ 75 cm) air tube for flexible placement and ease of use with your BP monitor.

• • Latex-free: not made with natural rubber latex.

• • CE-certified — complies with relevant European safety and health standards.

• • Strong hook-and-loop (Velcro) fastener for secure fitting.

• • Helps provide accurate blood pressure results when used correctly with a compatible Omron monitor

• Product description: Upper Arm Blood Pressure Monitor Cuff

• Product name: Intelli Wrap Cuff

• Model: HEM-FL31 Type B REF HEM-FL31-BAP

• Arm circumference: 22 to 42 cm

• Weight: Approx. 133g (Cuff), 28g (Air tube)

• Dimensions: Approx. 145 mm x 532 mm (air tube: 750 mm)

• Operating conditions: +10 °C to +40 °C/15 to 90 % RH (non-condensing)/ 800 to 1060 hPa

• Storage/Transport conditions: -20 °C to +60 °C/10 to 90% RH (non-condensing)

• Durable period(Service life): 5 years

Package Contents :

1. IntelliWrap Fit Cuff
2. Instruction Manual